1. Start by going to the Timeclock report

   Home > Reporting > Timeclocks

2. Click View Raw Timeclocks

3. Click on a Punch Time
    This will open another window where you will adjust the punch times

4. Click Add Clock

5. Enter in the Punch Time information
    A) Clock Time and Date
    B) Clock Type (In/Out)
    C) Street Address

8. Click Save

Note: You can also fix Clock In/Out Issues, to do that follow the guide below.

  • Any and all punch time issues will be shown here. To edit a punch time click on the date and time (where the arrow is pointing) Then repeat steps 4 & 5.